COMPANY HEADER
Request Information
Unit of Measure
Items
General Tool Washer and Gasket Cutter

General Tool Washer and Gasket Cutter
Allpax M3 Rotary-Style Gasket Cutter

Allpax M3 Rotary-Style Gasket Cutter
Allpax Motorized M3 Rotary-Style Gasket Cutter

Allpax Motorized M3 Rotary-Style Gasket Cutter
Proxxon Thermocut 115/E Hotwire Cutter

Proxxon Thermocut 115/E Hotwire Cutter
Proxxon Spare Wire Cutter for Thermocut 115/E Hotwire Cutter

Proxxon Spare Wire Cutter for Thermocut 115/E Hotwire Cutter
Description N/A The #11 Washer and Gasket Cutter can create washers and gaskets of leather, rubber, cork, graphite, fiber, copper and other soft materials.
  • Combination round/square shank can be used with a bit brace or hand drill
  • Made of steel, including graduated beam for adjusting diameters from 5/8 in. to 6-1/2 in.
  • Two independently adjustable blades cut inside and outside diameters at the same time
  • Only safe to use with a handheld variable-speed drill running at less than 100 rpm
  • Included blades (#11B) are replaceable
  • Diameter range: 5/8 to 6-1/2 in.
 		N/A Cut accurate flange and ring gaskets with the M3 Rotary-Style Gasket Cutter. Designed primarily for non-metallic gasket materials such as cork, fiber, and rubber, up to 1/4" thick. Cuts gaskets with a face width of 1/4" to 7"; from 2" I.D. to 22" O.D. Accessory scale bars (not included) extend cutting range from 22" I.D. to 42" O.D., or 42" I.D. to 62" O.D. Mounts on a vise or clamps to a piece of angle iron. N/A
  • Cut accurate flange and ring gaskets with the Motorized M3 Rotary-Style Gasket Cutter
  • Perfect tool for fabricating multiple runs of the same-size gaskets quickly and efficiently
  • Designed primarily for non-metallic gasket materials such as cork, fiber, and rubber, up to 1/4" thick
  • Cuts gaskets with a face width of 1/4" to 7"; from 2" I.D. to 62" O.D.
  • Mounts to any workbench with 1/4" bolts (not included)
 		N/A Ideal for architects, designers, decorators, artists and teachers. For building architectural models, prototypes as well as classic model railroad, plane and boat items.

The large table with 15 11/32" x 11" (390 x 280mm) ensures smooth and easy movement of the work piece. The printed grid and protractor assist with division and cutting. The solid aluminum overarm has a 13 3/4" (350mm) throat and offers 5 1/2" (140mm) in height. The holder and wire coil (one spool of wire 98ft., 0.008" diameter is included) may be shifted and adjusted along the overarm to enable miter cutting. An LED indicates operation and thus reminds you not to touch the hot wire to prevent burnt fingers (the wire heats to maximum in less than 1 second). 		N/A
Brands N/A General Tools & Instruments N/A Allpax N/A Allpax N/A Proxxon N/A Proxxon
Dimensions N/A N/A 16 x 10 x 4.25 in N/A 12 x 10.5 x 13 in N/A N/A
Cutting Wire Temperature N/A N/A N/A N/A 100 to 200 ºC210 to 390 ºF N/A
Maximum Secondary Transformer Voltage at 1 Ampere (A) Current N/A N/A N/A N/A 10 V N/A
Alternating Current (AC) Voltage at 60 Hertz (Hz) Frequency N/A N/A N/A N/A 110 to 120 V N/A
Weight N/A N/A 15 lb N/A 41.0 lb N/A 6.6 lb3 kg N/A
Spool Diameter N/A N/A N/A N/A 5/16" (8mm) Ø 0.008" x 98ft (Ø 0.2mm x 30m) Ø 1/4" (6.5mm) Ø 15/16" (24mm) N/A 5/16" (8mm) Ø 0.008" x 98ft (Ø 0.2mm x 30m) Ø 1/4" (6.5mm) Ø 15/16" (24mm)
Spool Thickness N/A N/A N/A N/A N/A 5/16 in8 mm
Bore Diameter N/A N/A N/A N/A N/A 1/4 in6.5 mm
Additional Information N/A
Features N/A N/A
  • Heavy-duty, cast iron frame with 7" throat
  • Precision steel components
  • Crank operated
  • Durable, heat-treated tool steel, rotary cutting discs
  • Made in USA
 		N/A
  • Heavy-duty, cast iron frame with 7" throat
  • Precision steel components
  • Durable, heat-treated tool steel, rotary cutting discs
  • 1/6 Horsepower gear motor; 120 VAC
  • Made in USA
 		N/A N/A
Note N/A N/A N/A N/A The correct temperature, being material and thickness dependent, is learned from experience. Profiles are ideally cut at lower temperatures and while applying less cutting force. N/A