Item # 320038, JET 5 Feet (ft) Arm Radial Drill Press On Penn Tool Co.

Unit of Measure

Technical Specs | Features

Brands	N/A JET
Overall Length	N/A 116 in
Overall Width	N/A 55 in
Overall Height	N/A 112 in
Drilling Capacity Cast Iron	N/A 2-5/16 in
Drilling Capacity Mild Steel	N/A 2-1/2 in
Tapping Capacity Cast Iron	N/A 2-3/8 in
Tapping Capacity Mild Steel	N/A 2 in
Maximum Distance From Column to Spindle	N/A 63 in
Minimum Distance From Column To Spindle	N/A 17 in
Number Of Spindle Speeds	N/A 12
Range of Spindle Speeds Revolution Per Minute (Rpm)	N/A 40 to 1920 rpm
Base Dimensions	N/A 97-5/8 X 41-11/32 X 8-1/4 in
Motor Voltage	N/A 230 V460 V
Number of Phase	N/A 3
Motor Horse Power (Hp)	N/A 7-1/2 hp
Spindle Taper	N/A MT5
Table Size	N/A 27-7/8 X 19-5/8 X 15-3/4 in
Column Diameter	N/A 17 in
Prewired Voltage	N/A 230 V
Net Weight	N/A 11000 lb
Boring Capacity Steel	N/A 5 in
Boring Capacity Cast Iron	N/A 7-3/8 in
Travel of Head Horizontal	N/A 49-5/8 in
Maximum Distance Base-Spindle	N/A 63 in
Minimum Distance Base-Spindle	N/A 13 in
Arm Travel Vertical	N/A 50 in
Quill Travel	N/A 14-9/16 in
Quill Travel w/ Powerfeed engaged	N/A 13 in
Quill Down Feed Rates	N/A 0.003 to 0.038
Coolant Pump Motor	N/A 1/2 hp
Machine Height from Floor	N/A 124-58/64 in

N/A

The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
The spindle is made of the finest case hardened steel for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
Push button controls are all reduced to 110V
Electrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance
Entire frame is made of Methanide and high tensile strength cast iron to handle the heaviest of jobs
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
Centralized control center
Automatic tool ejector
Hydraulic head and column clamping
Built in work light
Coolant pump
Tool kit
Box table

Brands