COMPANY HEADER
Request Information
Built using the finest components, the DP-1400VS floor drill press draws strength from its sturdy base and column that won't flinch during the heaviest drilling sessions. With a unique table that pivots 360 degrees, this variable-speed drill press will prove an ideal investment for any machinist or fabricator.
Unit of Measure

Technical Specs

Shipping Weight

 N/A 760 lb

Brands

 N/A Baileigh

Table Slots

 N/A 0.551 in

Base Width

 N/A 7.75 in

Tapping Capacity

 N/A 5/8 in

Quill Diameter

 N/A 2.44 in

Diameter of Column

 N/A 4 in

Spindle Taper

 N/A MT 3

Table Size

 N/A 18-3/4 x 12-1/4 in

Swing

 N/A 18 in

Drill Capacity

 N/A 1.25 in

Spindle Travel

 N/A 5.9 mm

Column Diameter

 N/A 4 in

Power

 N/A 220 V

Shipping Dimensions

 N/A 60 x 44 x 81 in

Part Number

 N/A DP-1400VS

Base Length

 N/A 25.5 in

Spindle Nose to Table

 N/A 28-1/2 in

Spindle Nose to Base

 N/A 44 to 3/4 in

Motor Phase

 N/A 2 hp

Table Angle Adj L or R

 N/A 360 º

Power Phase

 N/A 1 pH

Spindle Speed High

 N/A 230 to 2500 rpm

Spindle Speed Low

 N/A 80 to 1000 rpm

Special Notes

Special Notes

 N/A Includes integrated table vise

Features

Features

 N/A
  • 2 hp motor runs on just 110 volt power.
  • Tackles a maximum drilling capacity of 1-1/16" mild steel.
  • Heavy duty spindle transfers power to the #3 Morse taper tooling
  • Speed potentiometer dial controls powerful inverter-driven head.
  • Variable drilling speed, ranging from 120 to 2000 rpm, lets you choose the right setting to suit your application.
  • Digital readout displays actual spindle rpm, ensuring precise results time after time.
  • Features an auto-reversing tap function with up to 5/8" capacity.
  • 4-1/2" Wide column provides extra support and rigidity to reduce flexing even during the toughest drilling sessions.
  • Base and 22" x 18.5" table are made of a heavy iron casting to increase rigidity.
  • Very large .625" T-slots let a vise or fixture securely hold your material.
  • Coolant system, stored in the base, sprays out at the end of the spindle behind the splash and safety guard to extend drill bit and tap lifespan.
  • Covered by a 1-year parts warranty and lifetime technical support by phone from Baileigh's team of experienced reps.