COMPANY HEADER
Request Information
Unit of Measure

Technical Specs

Shipping Weight

 N/A 675 lb

Brands

 N/A Ellis

Spindle-Base

 N/A 46-1/4 in

Control Box

 N/A - Infinitely variable speed with a turn of the dial
- Instantaneous electronic reversing
- Full torque at low speeds
- All solid state circuitry
- Continuous speed adjustment while in operation

Drills-Center

 N/A 18-1/8 in

Tapping Capacity

 N/A 3/4 in

Morse Taper

 N/A 3

Quill Diameter

 N/A 3 in

Base

 N/A T-slotted
16-3/8" x 26-5/8"
2 slots for 1/2" T-bolts
ground working surface

Spindle Travel

 N/A 5-3/8 in

Width

 N/A 20 in

Height

 N/A 6 in9-1/2 in

Depth

 N/A 29 in

Speed

 N/A 0 to 1200 rpm

Single Phase 2 HP Alternating Current (AC) Motor

 N/A 110 V220 V

Steel Drilling Capacity

 N/A 1-1/16 in

Cast Iron Drilling Capacity

 N/A 1-1/4 in

Maximum Spindle-Table

 N/A 27-1/4 in

Table

 N/A Production type:
T-slotted 15-7/8" x 17-7/8"
2 Slots for 1/2" T-bolts
ground working surface
coolant trough

Additional Information

Additional Information

 N/A
  • Continuous speed adjustment while in operation
  • Instantaneous reversing for tapping
  • One turn on knob for adjusting speed (0 to 1200 rpm)

Features

Features

 N/A
  • Adjust speeds while operating in the material
  • High torque at low rpm speeds
  • Instantaneous reversing for tapping
  • Tapping head is not needed
  • Machine tap goes into ball bearing chuck
  • Can tap either left or right handed threads
  • Drill head and table rotate 360° around column
  • Smooth operating table raiser
  • Fully enclosed spindle
  • Quill lock and depth control
  • Same ball bearing chuck holds both drill and tap