COMPANY HEADER
Request Information
Unit of Measure

Technical Specs

Brands

 N/A Gromax

Table Size

 N/A 28 x 20 in

Weight

 N/A 7040 lb

Model

 N/A SDNC60P

Resolution

 N/A 0.125 in0.005 mm

Table Load Capacity

 N/A 660 lb

Servo Travel (X,Y)

 N/A 24 x 16 in

Servo Travel Z

 N/A 14 in

Back Slide Travel C

 N/A Manual move by motor drive /Program by servo (optional)

Distance Between Guide and Table

 N/A 2 to 12 in

Maximum Work Piece Size

 N/A 32 x 24 x 12 in

Lay Out (Width x Depth x Height)

 N/A 84 x 64 x 92 in

Capacity of Fluid (26.4 Gal Optional)

 N/A 13.2 Gal in

Packing Size

 N/A 112 x 72 x 84 in

Power Input

 N/A 200 V220 V380 V415 V440 V575 V3 pH50/60 Hz

Maximum Power Ration

 N/A 4 KVA6 KVA

Optional Amperes Maximum EDM Current

 N/A 25+25

Minimum Command Unit

 N/A 0.0125 in0.005 mm

Feed Back Unit With 1 Linear Scale

 N/A 5 in

Manual Speed (Slow, Middle, High, Rapid) by Parameter Setting

 N/A 6 speed (Slow, Middle, High, Rapid) by parameter setting

Optional Program Axis

 N/A 4 axis stand/ 4 axis

Edm Parameter

 N/A By selection work piece, electrode material & size of EDM parameter

On Line Help

 N/A Standard

Graphic Function

 N/A Standard

Monitor

 N/A 10.4 inch TFT or 14 Inch color CRT

Optional Accessories

Optional Accessories

 N/A
  • Auto filtering system
  • Electrode tubes
  • Guides
  • Keyless chuck 0~1.5mm
  • Keyless chuck 0~3.0mm
  • DRAM memory IC
  • Auto electrode changer 16pcs
  • 4th axis with linear motion
  • 4th axis with rotate function

Standard Accessories

Standard Accessories

 N/A
  • Paper filter 10mm (1pc)
  • Ceramic guide 0.5mm, 1.0mm (1ea)
  • Electrode tubes 0.5mm, 1.0mm (40ea)
  • Electrode holder 0.3~3.0mm (1pc)
  • Work light (1pc)
  • Tool kit and tool box (1set)
  • Back up program (1 CD-ROM)

Features

Features

 N/A
  • Auto edge finder is standard with this machine.
  • Can do drill production quickly.
  • CAD/CAM generated programs can be downloaded by Ethernet network RS232 or floppy disk.
  • De-ionized water should be used.
  • With online help, it's easy to do programming by G/M code.
  • Linear scale enhances long term operation and excellent accuracy.
  • EDM parameters stored and recall by: type of electrode, size of electrode & material of work piece.
  • Auto Electrode Change (AEC) is possible to adapt on this machine (optional).
  • Multiple coordinate display and full screen display of machining monitor and position.
  • Auto program restart function, middle start, program graphic check function, with graphic and machine bounded.
  • Auto electrode wear compensation--no need to program with electrode wear and guess how much electrode wear is. It automatically measures the electrode wear and compensates into the program.
  • Manual Data Input (MDI) function--after tested the program may save the program as a regular file.
  • Protection function while electrode touch work piece machine will stop.
  • There are 6 coordinates in this system as work piece reference position.