COMPANY HEADER
Request Information
The Euroboor ECO.100S+/T magnetic core drilling machine cuts holes up to ø 100 mm and is particularly suitable for tapping. This magnetic core drilling machine has an extremely powerful 1,900 W motor with an oil lubricated four-speed gearbox and innovative electronics which offer more safety, significantly reduce the risk of damage of the machine, tool and workpiece and protects the user in case of excessive vibrations or sudden displacement. The lifespan is considerably longer and you avoid high maintenance costs.
Unit of Measure

Technical Specs

Brands

 N/A Euroboor

Annular Cutting Diameter

 N/A 12 to 100 mm7/16 to 4 in

Twist Drilling Diameter

 N/A 1 to 31.75 mm1/16 to 1-1/4 in

Countersinking Diameter

 N/A 10 to 105 mm3/8 to 4-1/8 in

Threading

 N/A M3 to M30

Threading Diameter

 N/A 1/8 to 1-3/16 in

Length

 N/A 365 mm14-3/8 in

Width

 N/A 310 mm12-3/16 in

Height

 N/A 510 to 710 mm20-1/16 to 27-15/16 in

Stroke

 N/A 260 mm10-1/4 in

Weight

 N/A 27.8 kg61.3 lb

Magnet Length

 N/A 220 mm8-11/16 in

Magnet Width

 N/A 110 mm4-5/16 in

Magnet Height

 N/A 64 mm2-1/2 in

Magnetic Force

 N/A 3000 kg6615 lb

Motor Power

 N/A 1900 W17.3 A

Total Power

 N/A 2050 W18.6 A

Speed (No Load)

 N/A 140 to 400 rpm220 to 620 rpm42 to 110 rpm65 to 190 rpm

Speed (Load 1900 Watt (W) / 17.3 Ampere (A))

 N/A 152 rpm270 rpm480 rpm85 rpm

MT3 Weldon Spindle

 N/A 19.05 mm3/4 in

Voltage

 N/A 110 to 120 V220 to 240 V

Frequency

 N/A 50 to 60 Hz60 Hz

Features

Features

 N/A
  • Sensortec
  • Temptec
  • Gyro-Tec
  • Power surge protection
  • Power fluctuation protection
  • Carbon brush wear indicator & automatic shut-off
  • Overheat protection

Additional Features

Additional Features

 N/A
  • Four-speed oil lubricated gearbox
  • Particularly suitable for tapping
  • Right/left rotating
  • Morse Taper 3 spindle with integrated tool cooling and lubrication
  • Electronic speed adjustment
  • Torque control on motor house
  • Strong dual coil CNC machined 2-way magnet, causing the machine to use less energy, generate less heat and therefore lasts longer
  • Reduced risk of damaging machine, tools and workpiece and hurting operator
  • Suitable for use in areas and workplaces where power supply is of less quality
  • Reduced risk of armature damage
  • Reduced risk of control unit(s) damage
  • Timely service notification to avoid additional cost by unexpected downtime or unnecessary part replacement