COMPANY HEADER
Request Information
Uses only filtered, factory compressed air (80-100 PSIG) to produce cold air for spot cooling.
The internal configuration reduces air temperature by 100° F below inlet temperature. Can be used to cool various machining operations without the use of liquid coolant.
No Freon - No Moving Parts - Virtually Maintenance Free.
Built in muffler.
Meets OSHA noise specification.
Includes magnetic base.
Versatile Spot Cooling for Machining, Repair Shops and More
Safe on metals, plastics, glass and ceramic parts.
Unit of Measure

Technical Specs

Brands

 N/A Vortec

Type

 N/A Cold Air Gun

Air Capacity

N/A 900 Btu/hr

Hose Length

 N/A 8 in203.20 mm

Number of Outlets

 N/A 1

Maximum Pressure

N/A 100.00 psi

Tank/Unit Length

 N/A 269.88 mm10-5/8 in

Tank/Unit Height

 N/A 168.40 mm6.6300 in

Long Hose

 N/A 8 in

Cold Air Gun Model

 N/A 610

Compressed Air Pressure

 N/A 80 to 100 psig

Inlet Thread

 N/A 1/4 in

Inlet Type

 N/A National Pipe Thread (NPT)

Minimum Outlet Temperature at 70 ºF inlet Air

 N/A -10 ºF

Cooling Capacity

 N/A 900 Btu/hr

Air Consumption at 100 Pounds Per Square in Gauge (psig) Pressure

 N/A 15 scfm

Outlet Air Flow Rate

 N/A 2 to 15 scfm

Overall Length (OAL)

 N/A 18 5/8 in

Diameter

 N/A 1 3/4 in

Nozzle Length

 N/A 8 in

Flexible Nozzle Diameter

 N/A 1 in

Outlet Diameter (OD)

 N/A 3/8 in

Magnetic Base Diameter

 N/A 3 -3/16 in

Magnetic Base Height

 N/A 4-1/8 in

Weight

 N/A 3 lb

Supply Hose Diameter

 N/A 3/8 in

Maximum Recommended Pipe/Hose Length

 N/A 25 in

Recommended Filter Size

 N/A 25 scfm

Recommended Filter Model

 N/A 701S-24A

Benefits

Benefits

 N/A
  • Increase dry machining speeds up to 36%
  • Extend tool life by 50%
  • Eliminates the mess, expense and safety concerns of using mist coolants
  • Reduce waiting or normalization time by cooling parts faster
  • Eliminate the potential for burning and scorching
  • Avoid secondary parts cleaning after machining
  • Reduce grinding wheel loading caused by overheating
  • Airflow clears sawdust, shavings and dirt away from surface

Features

Features

 N/A
  • Creates cold air up to 100 F deg (+ 56 C deg) below the inlet compressed air temperature
  • Quiet operation; meets OSHA noise specifications
  • Adjustable temperature and flow rate
  • Highly reliable with no moving parts
  • Low pressure outlet air
  • Uses only compressed air - no Freon
  • System includes a magnetic base and a 5 micron auto-drain compressed air filter
  • Magnetic base allows for easy, close in positioning and easy portability
  • Ergonomic trigger mechanism on the Cold Air Pistol
  • Frost free nozzle eliminates mess from frost and condensation

Applications

Applications

 N/A
  • Cooling Molds & Molded Pieces
  • Drill & Tool Sharpening
  • Drilling
  • Machining
  • Milling
  • Surface Grinding
  • Turning

Additional Information

Additional Information

 N/A Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no moving parts to wear out, Cold Air Guns require no electricity, just a compressed air source. The air consumption range is from 15 SCFM to 35 SCFM.
Cold Air Guns are most often used for cooling of metal parts, in the machining and repair of metals, plastics, wood, ceramics and other materials. Cold air machining outperforms mist coolants and substantially increases tool life and feed rates on dry machining operations. The effective cooling from a Cold Air Gun can eliminate heat-related parts growth while improving parts tolerance and surface finish quality. Cold Air Guns have adjustable temperature and flow settings; and some models have a frost free nozzle to eliminate mess from frost and condensation.