Flex-Hone Diamond Honing Tool, 20mm (.787") Bore Diameter - BC20M800CD - 53-800-758
- Free cutting with a rapid cut rate that produces an optimal finish.
- Designed to finish harder materials.
- Carbide wear parts.
- Guide & drill bushings.
- Ceramic cylinders.
- Heat treated steel.
- High nickel stainless steel.
- MMX aluminum alloys.
- Chrome & plated bores.
- Aerospace components.
- Medical parts.
- EDM recast layer.
- Contain 95% raw grain abrasive at the point of attack as opposed to abrasive nylon tools which contain 30% to 40%.
- Resin bond diamond crystals that have high friability.
- A crystal with high friability creates self-sharpening edges.
- Tools are listed by the nominal diameter in which they are intended to be used & the actual sizes are made larger to supply the proper cutting pressure.
- If the end user nominal bore is between standard sizes, then the next larger tool should be chosen.
- Case Study: Issue: A manufacturer of carbide wear rings was having difficulty achieving their required surface finish. Solution: In this instance, the diamond flex-hone was used in progressively finer grits to create a near mirror finish lowering Ra from 0.7 to 0.05um.
