COMPANY HEADER
Request Information
The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360º, indicated on a scale. Height is adjustable. One revolution equals 1/32" (1mm) travel, 1 division equals 0.002" (0.05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.
Unit of Measure

Technical Specs

Brands

 N/A Proxxon

Table Size

 N/A 10-5/8 x 3-5/32 in270 x 80 mm

Speed

 N/A 1,500 to 2,200 rpm280 to 550 rpm870 to 1,200 rpm

X-Y Travel

 N/A 6-11/16 x 2-9/16 in170 x 65 mm

Alternating Voltage Current (Vac) At 60 Hertz (Hz)

 N/A 110 to 120 V

Height

 N/A 20 in500 mm

Column Size

 N/A 1-3/8 x 15-3/4 in35 x 400 mm

Weight

 N/A 41.0 lb17 kg

Additional Information

Additional Information

 N/A The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm).

Note

Note

 N/A For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230's lock levers.