COMPANY HEADER
Request Information
Unit of Measure

Technical Specs

Brands

 N/A JET

Model

 N/A JTM-949EVS/230

Table Size

 N/A 9 x 49 in

Ram Travel

 N/A 15-1/4 in

Spindle Taper

 N/A R8

Spindle Motor Power

 N/A 3 hp

Spindle Motor Phase

 N/A 3

Voltage

 N/A 230 V

Spindle Speeds

 N/A 60 to 4500 rpm

Length

 N/A 66 in

Width

 N/A 63 in

Height

 N/A 86 in

Spindle Travel

 N/A 5 in

Quill Diameter

 N/A 3-3/8 in

Working Table Longitudinal Travel

 N/A 36 in

Working Table Cross Travel

 N/A 12 5/8 in

T-Slots Centers

 N/A 2 1/2 in

Style

 N/A EVS (Electronic Variable Speed)

Collet Capacity

 N/A 1/8 to 7/8 in

Quill Down Feed Rates

 N/A 0.0015 to 0.003 to 0.006

Work Table Weight Capacity

 N/A 720 lb

Table Longitudinal Travel With Powerfeed

 N/A 30 3/4 in

Travel of Knee

 N/A 15 3/4 in

Digital Readout

 N/A 3-Axis (Quill) ACU-RITE 203

Maximum Distance Spindle to Table

 N/A 20 3/4 in

Maximum Distance Spindle to Column

 N/A 18-1/8 in

Column Width

 N/A 18 in

Saddle Width

 N/A 11 1/2 in

Durability

 N/A
  • Certified Meehanite® Castings
  • Class 7 bearings support the spindle for maximum ridgity in heavy cutting applications
  • Precision bored and honed milling head
  • Spindle head is internally cooled extending bearing, belt and motor

Safety

 N/A
  • For added safety, the JTM-949EVS follows strict guidelines and electrical requirements to be certified by CSA Group
  • Swing away spindle guard
  • L.E.D. work lamp
  • Internal coolant tank built into casting base

Ease of Use

 N/A
  • Automatic Lubrication every 30 minutes with a flow of 3-6cc reduces maintenance
  • Inverter Drive System and emergency stop located on a swing away control arm moves all major functions within the operators reach
  • JET exclusive new cas

Inverter Type

 N/A Delta, B

Weight

 N/A 2420 lb

Standard Equipment

Standard Equipment

 N/A
  • Spindle Safety Guard
  • Halogen Machine Lamp
  • Dual locks on all moveable surfaces
  • Chip pan
  • Way covers
  • Draw bar
  • Tool box with tools

Features

Features

 N/A
  • Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
  • Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
  • CSA/CUS Certified
  • Dual locks on all moveable surfaces
  • JET designed Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
  • Locks on all moveable surfaces
  • New! JET designed Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
  • Spindle head is internally cooled
  • Spindle head is internally cooled extending bearing, belt and motor life
  • Swing away control box houses an e-stop and puts all controls at the operators fingertips
  • Swing away safety shield
  • Table and ways are hardened up to 54 HRC and precision ground for greater accuracy
  • The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
  • The innovative design of the machine base provides an easier solution to level the machine without raising it up off the floor
  • The X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movements