Item # 690524, JET JTM-949EVS Milling Machine with 2-Axis ACU-RITE 203 DRO and X, Y, and Z-Axis Power Feed On Penn Tool Co.

Unit of Measure

Technical Specs | Standard Equipment | Features

Technical Specs

Brands	N/A JET
Model	N/A JTM-949EVS/230
Table Size	N/A 9 x 49 in
Ram Travel	N/A 15-1/4 in
Spindle Taper	N/A R8
Spindle Motor Power	N/A 3 hp
Spindle Motor Phase	N/A 3
Voltage	N/A 230 V
Spindle Speeds	N/A 60 to 4500 rpm
Length	N/A 66 in
Width	N/A 63 in
Height	N/A 86 in
Spindle Travel	N/A 5 in
Quill Diameter	N/A 3-3/8 in
Working Table Longitudinal Travel	N/A 36 in
Working Table Cross Travel	N/A 12 5/8 in
T-Slots Centers	N/A 2 1/2 in
Style	N/A EVS (Electronic Variable Speed)
Collet Capacity	N/A 1/8 to 7/8 in
Quill Down Feed Rates	N/A 0.0015 to 0.003 to 0.006
Work Table Weight Capacity	N/A 720 lb
Table Longitudinal Travel With Powerfeed	N/A 30 3/4 in
Travel of Knee	N/A 15 3/4 in
Digital Readout	N/A 2-Axis Newall DP700
Maximum Distance Spindle to Table	N/A 20 3/4 in
Maximum Distance Spindle to Column	N/A 18-1/8 in
Column Width	N/A 18 in
Saddle Width	N/A 11 1/2 in
Power Draw Bar	N/A Pneumatic
Durability	N/A Certified Meehanite® Castings Class 7 bearings support the spindle for maximum ridgity in heavy cutting applications Precision bored and honed milling head Spindle head is internally cooled extending bearing, belt and motor
Safety	N/A For added safety, the JTM-949EVS follows strict guidelines and electrical requirements to be certified by CSA Group Swing away spindle guard L.E.D. work lamp Internal coolant tank built into casting base
Ease of Use	N/A Automatic Lubrication every 30 minutes with a flow of 3-6cc reduces maintenance Inverter Drive System and emergency stop located on a swing away control arm moves all major functions within the operators reach JET exclusive new cas
Inverter Type	N/A Delta, B
Weight	N/A 2420 lb

Standard Equipment

Spindle Safety Guard
Halogen Machine Lamp
Dual locks on all moveable surfaces
Chip pan
Way covers
Draw bar
Tool box with tools

Features

Automatic oiler releases 3 to 6 cc/cy of lubrication every 30 minutes
Class 7 spindle bearings support the spindle for maximum rigidity in heavy cutting applications
CSA/CUS Certified
Dual locks on all moveable surfaces
JET designed Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
Locks on all moveable surfaces
New! JET designed Certified Meehanite® casting with enhanced ribbing ensures rigidity and tolerance retention
Spindle head is internally cooled
Spindle head is internally cooled extending bearing, belt and motor life
Swing away control box houses an e-stop and puts all controls at the operators fingertips
Swing away safety shield
Table and ways are hardened up to 54 HRC and precision ground for greater accuracy
The electrical box has been relocated to the back of the mill and houses two 115V outlets for powered accessories
The innovative design of the machine base provides an easier solution to level the machine without raising it up off the floor
The X and Y-Axis are coated with Turcite-B for reduced vibration and smooth movements

Technical Specs

Brands

Model

Table Size

Ram Travel

Spindle Taper

Spindle Motor Power

Spindle Motor Phase

Voltage

Spindle Speeds

Length

Width

Height

Spindle Travel

Quill Diameter

Working Table Longitudinal Travel

Working Table Cross Travel

T-Slots Centers

Style

Collet Capacity

Quill Down Feed Rates

Work Table Weight Capacity

Table Longitudinal Travel With Powerfeed

Travel of Knee

Digital Readout

Maximum Distance Spindle to Table

Maximum Distance Spindle to Column

Column Width

Saddle Width

Power Draw Bar

Durability

Safety

Ease of Use

Inverter Type

Weight

Standard Equipment

Standard Equipment

Features

Features