COMPANY HEADER
Request Information
Unit of Measure

Technical Specs

Brands

 N/A JET

Model

 N/A ETM-949

Table Size

 N/A 9 x 49 in

Ram Travel

 N/A 14 in

Spindle Taper

 N/A R8

Head Swivel Right Hand (RH) in Degrees

 N/A 90 º

Head Swivel Left Hand (LH) in Degrees

 N/A 90 º

Head Tilting Front in Degrees

 N/A 45 º

Head Tilting Bank in Degrees

 N/A 45 º

Spindle Motor Power

 N/A 3 hp

Spindle Motor Phase

 N/A 3

Voltage

 N/A 230 V

Spindle Speeds

 N/A 60 to 4500 rpm

Length

 N/A 68 in

Width

 N/A 63 in

Height

 N/A 84 in

Spindle Travel

 N/A 5 in

Quill Diameter

 N/A 3-3/8 in

Working Table Longitudinal Travel

 N/A 35 in

Working Table Cross Travel

 N/A 12 in

T-Slots Centers

 N/A 2 1/2 in

Style

 N/A Variable Speed

Current Draw at 230 Volt (V) and 3 Phase (Ph)

 N/A 18 A

Collet Capacity

 N/A 1/8 to 7/8 in

Quill Down Feed Rates

 N/A 0.0015 to 0.003 to 0.006

Work Table Weight Capacity

 N/A 550 lb

Spindle To Column Minimum

 N/A 6 1/2 in

Spindle Drive

 N/A Variable

T-Slots Number And Size

 N/A 3 in5/8 in

Travel of Knee

 N/A 16 in

Digital Readout

 N/A 3-Axis (Knee) ACU-RITE 203

Powerfeed

 N/A Servo X,Y and Z-Axis Power feeds

Maximum Distance Spindle to Table

 N/A 18 3/4 in

Maximum Distance Spindle to Column

 N/A 21-2/5 in

Current Draw at 460 Volt (V) and 3 Phase (Ph)

 N/A 9 A

Prewired Voltage

 N/A 230 V

Weight

 N/A 2420 lb

Standard Equipment

Standard Equipment

 N/A
  • Spindle Safety Guard
  • Halogen Machine Lamp
  • Dual Locks On All Surfaces
  • Toolbox with Tools
  • Tolerance Test Sheet

Features

Features

 N/A
  • Spindle utilizes class 7210 (P4, ABEC-7) precision angular bearings for the industry leading spindle taper runout of 0.00012"
  • Chromium Molybdenum spindle is fully hardened through a carbonizing treatment and is precisely ground to maintain strict tolerances
  • Seamless, one-piece, steel quill is induction hardened and chromed for increased strength and precision ground for greater accuracy
  • The Y and Z-Axis ways are hand scraped to a minimum of 16 points per square inch for greater oil retention and smooth movements
  • Heat treated and polished lead screws are supported by thrust bearings ensuring smooth, incremental movements of the table under load
  • The table and saddle backlash is controlled by an advanced double nut design that eliminates end-play for precisely controlled lateral movements
  • A patented vari-disc key provides up to ten times the wear resistance than aluminum or brass keys
  • Variable speed pulleys are ground and multiplane dynamically balanced, reducing vibration and ensuring smooth speed transitions
  • Ball bearing support of the motor shaft ensures proper loading, support and alignment for quiet, accurate operation at any speed
  • Hardened and ground table provides a stable and accurate platform for milling a diverse variety of materials
  • Every thirty minutes, with a flow of 3 to 6 cc/cy your Elite mill is automatically lubricated
  • Stainless steel Y-Axis way cover provides extra years of protection over the standard sheet metal cover
  • Certified Meehanite® castings retain their tolerances and remain rigid through many years of machining
  • The electronic spindle brake, when activated, interrupts power to the spindle to prevent accidental start ups
  • The mounted control box houses major mill functions as well as an emergency stop button
  • For added safety, the ETM-949 Mill follows strict guidelines and electrical requirements to be certified by CSA Group