COMPANY HEADER
Print Back
Econoline 12 Cubic Feet Per Minute (ft³/min) Flow Sandblasting Gun Assembly (00223925)
Unit of Measure
Items Econoline 12 Cubic Feet Per Minute (ft³/min) Flow Sandblasting Gun Assembly (00223925)
00223925
Econoline 12 Cubic Feet Per Minute (ft³/min) Flow Sandblasting Gun Assembly 		Econoline 25 Cubic Feet Per Minute (ft³/min) Flow Sandblasting Gun Assembly (00223933)
00223933
Econoline 25 Cubic Feet Per Minute (ft³/min) Flow Sandblasting Gun Assembly 		9959610-23__98164-1642474807
99596108
Alemite 4035 26 (oz) Ounce Capacity Carbon Steel Oil Gun 		imageRendering__78074-1421458507
LNC657
Lincoln Standard Duty Air Powered Chassis Lubrigun 		imageRendering__06370__47980-1418114275
5215
Exair® High Power Cold Gun
Description N/A Compatible with Econoline Mini Bench, RA-24-0 Super & RA-30-0 Super 201379 - 00223925 N/A Compatible with DP36-1 Direct Pressure, Econoline RA-48x48 Flip Top, RA-36-1, RA-40x40 Flip Top, RA-42x24 Flip Top, RA-48-2 & RA-60x48-CB 201381 - 00223933 N/A N/A Lincoln Standard Duty Air Powered Chassis Lubrigun - LNC657
  • Series 20, single acting, 50:1 ratio, air operated grease pump
    • High pressure performance for the economy conscious buyer
      • Comes with band type mobile drum-dolly
        • Optional follower plate not included
          • Complete kit also includes: 7 foot 5000 psi high pressure hose, control valve (LNC 740), straight swivel, and inlet air coupler. Does not include drum. 
N/A A new solution to an old problem. Heat build up on dry machining operations reduces tool life and machining rates. The Cold Gun Aircoolant System produces a stream of clean cold air at 50°F (28°C) below supply air temperature.
Operation is now a quiet 70 dBA and there are no moving parts to wear out. It will remove heat to prolong tool life and increase productivity on machining operations when liquid coolants cannot be used.

No Hose Outlets.
Brands N/A Econoline N/A Econoline N/A N/A Lincoln N/A Exair®
Flow N/A 12 ft³/min N/A 25 ft³/min N/A N/A N/A
Number of Packages N/A 1 N/A 1 N/A N/A N/A
Minimum Order N/A 1 N/A 1 N/A N/A N/A
Capacity N/A N/A N/A 26 oz N/A N/A
Manufacturer Part Number N/A 201379 N/A 201381 N/A N/A N/A
UNSPSC Code N/A 23240000 N/A 23240000 N/A N/A N/A
Type N/A
Air Capacity N/A
Hose Length N/A
Number of Outlets N/A
Maximum Pressure N/A
Minimum Pressure (psi) N/A
Tank/Unit Length N/A
Tank/Unit Height N/A
Temperature Control N/A
Long Hose N/A
Cold Air Gun Model N/A
Compressed Air Pressure N/A
Inlet Thread N/A
Inlet Type N/A
Minimum Outlet Temperature at 70 ºF inlet Air N/A
Cooling Capacity N/A
Air Consumption at 100 Pounds Per Square in Gauge (psig) Pressure N/A
Outlet Air Flow Rate N/A
Overall Length (OAL) N/A
Diameter N/A
Nozzle Length N/A
Flexible Nozzle Diameter N/A
Outlet Diameter (OD) N/A
Magnetic Base Diameter N/A
Magnetic Base Height N/A
Weight N/A
Supply Hose Diameter N/A
Maximum Recommended Pipe/Hose Length N/A
Recommended Filter Size N/A
Recommended Filter Model N/A
Cone Nozzle N/A
Fan Nozzle N/A N/A N/A N/A N/A 32 mm
Pressure Supply N/A
Air Consumption N/A
Sound Level N/A
Flow Rate N/A
How the Cold Gun Works N/A N/A N/A N/A N/A The Cold Gun incorporates a vortex tube to convert an ordinary supply of compressed air into two low pressure streams, one hot and one cold. The hot airstream is muffled and discharged through the hot air exhaust. The cold air is muffled and discharged through the flexible hose, which directs it to the point of use. The magnetic base provides easy mounting and portability.
The Compressed Air Supply
The Cold Gun is designed to use full line pressure of 80-100 PSIG (5.5-6.9 BAR). Temperature drop and flow are reduced when lower input pressures are applied. The use of clean, filtered air is essential to the operation of the Cold Gun. A manual drain filter that removes moisture, dirt and other particulates from the compressed air is included with each Cold Gun System.
Controlling the Cold Air
The EXAlR Cold Gun gives instant cold air when filtered compressed air is supplied to it. Cycling on and off is a good way to save air. For on and off control, use a Model 9012 Manual Shutoff Valve. To turn the Cold Gun on with the machine, the Model 9020 Solenoid Valve may be used and wired through the machine control switch. This method is ideal for hand grinders and drill sharpeners.
Benefits N/A
Features N/A
Applications N/A N/A N/A N/A N/A
  • Tool sharpening
  • Drill and cutter grinding
  • Routing
  • Plunge and form grinding
  • Milling
  • Surface grinding
  • Drilling
  • Tire grinding
  • Band sawing
  • Plastic machining
Cold Gun Advantages N/A N/A N/A N/A N/A
  • Improves production rates
  • Prevents burning
  • Extends tool life - reduces breakage
  • Improves tolerance control
  • Prevents smearing of metal or plastics
  • Finished part is dry
  • Eliminates wheel loading
Additional Information N/A