Item # 320033, JET Radial Drill Press On Penn Tool Co.

Unit of Measure

Technical Specs | Features

Brands	N/A JET
Overall Length	N/A 64 in
Overall Width	N/A 32 in
Overall Height	N/A 85 in
Drilling Capacity Cast Iron	N/A 2 in
Drilling Capacity Mild Steel	N/A 1-1/2 in
Tapping Capacity Cast Iron	N/A 1 in
Tapping Capacity Mild Steel	N/A 3/4 in
Minimum Distance From Column To Spindle	N/A 29-1/2 in
Distance From Column To Spindle	N/A 8-5/8 in
Number Of Spindle Speeds	N/A 6
Range of Spindle Speeds Revolution Per Minute (Rpm)	N/A 88 to 1500 rpm
T-Slots Number And Size	N/A 3 in3/4 in
Number of Phase	N/A 3
Spindle Taper	N/A MT4
Table Size	N/A 23-5/8 x 17-1/2 x 15 in
Column Diameter	N/A 8-1/4 in
Prewired Voltage	N/A 230 V
Net Weight	N/A 2970 lb
Boring Capacity Steel	N/A 2-3/7 in
Boring Capacity Cast Iron	N/A 4 in
Travel of Head Horizontal	N/A 20-7/8 in
Maximum Distance Base-Spindle	N/A 41-3/4 in
Minimum Distance Base-Spindle	N/A 9-5/8 in
Arm Travel Vertical	N/A 23-13/16 in
Quill Travel	N/A 8-1/4 in
Quill Travel w/ Powerfeed engaged	N/A 8 -1/4 in
Quill Down Feed Rates	N/A 0.002 0.004 0.006
Coolant Pump Motor	N/A 1/8 hp
Machine Height from Floor	N/A 85-7/16 in

N/A

The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
The spindle is made of finest case hardened steel, for extra strength and wear
The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
Arm raising safety device prevents arm from dropping
Counter balanced mechanism for spindle return
6 Speeds/3 Feed rates make exotic materials easier to drill, bore and tap
Centralized control center
Automatic tool ejector
Independent arm electric clamping system, which locks and unlocks the head and column
Push button controls are all reduced to 110VAC
Electrical circuits are located in the build-in control box at the rear of the arm. This keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs

Brands