COMPANY HEADER
Print Back
For laboratory, prototype and precision production work. For a wide work piece, such as a PC board. Drill to center of a 17" circle. Available with Albrecht chuck and inch or metric calibration.
Unit of Measure

Technical Specs

Brands

 N/A Servo

Overall Height

 N/A 18 in457 mm

Maximum Distance of Chuck/Collet To Base[A]

 N/A 6 in152 mm

Throat Depth [B] (Spindle Cl To Column)

 N/A 8.5 in216 mm

Working Base Area (Width) [C]

 N/A 9.75 in248 mm

Working Base Area (Depth) [D]

 N/A 13.25 in324 mm

Column Diameter Through Head [E]

 N/A 1.25 in31 mm

Column Length [G]

 N/A 7.5 in191 mm

Footprint Width

 N/A 10.5 in267 mm

Footprint Depth

 N/A 18.5 in470 mm

Base

 N/A Fly-cut cast aluminum base with fine grain cast iron offset and elbow

MT3 Spindle (Weldon)

 N/A Chuck

Weight

 N/A 27 lb12.2 kg

Features

Features

 N/A
  • Inch and Metric versions
  • Drill holes down to 0.002” / 0.05mm Dia.
  • Spindle runout: 0.0002" / 0.005 mm TIR
  • High accuracy down stop for drilling depth control (0.001” / 0.05mm per division)
  • Variable speed spindle (200-20,000 RPM)
  • Quill travel (stroke): 1.5” / 38.1mm
  • Keyless Albrecht chuck versions for quick and easy drill change;
  • standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm
  • WW collet versions for less run out and improved accuracy;
  • 0.0039"-0.252" / 0.1-6.4 mm collet sizes available
  • Graduated dial gauge for depth control
  • (0.001” / 0.05mm per division)
  • Wide selection of bases and accessories
  • Drill capacity: to 1/16" in inconel
  • to 1/8" in steel
  • to 3/16" in aluminum (collet only)
  • Electrical: 115 volts AC, 50/60 Hz, 2 amps
  • (220V/115V transformer available)