Item # 7150-M, 305 Millimeter (mm) Column Servo Standard Drill Press with Collet Spindle On Penn Tool Co.

Unit of Measure

Technical Specs | Features

Brands	N/A Servo
Overall Height	N/A 18 in457 mm
Maximum Distance of Chuck/Collet To Base[A]	N/A 7.5 in190 mm
Throat Depth [B] (Spindle Cl To Column)	N/A 3.5 in89 mm
Working Base Area (Width) [C]	N/A 6.5 in165 mm
Working Base Area (Depth) [D]	N/A 6.5 in152 mm
Column Diameter Through Head [E]	N/A 1.25 in31 mm
Column Length [G]	N/A 12 in305 mm
Footprint Width	N/A 7.15 in181 mm
Footprint Depth	N/A 11.8 in299 mm
Base	N/A Fine grain, ground cast iron base
MT3 Spindle (Weldon)	N/A Collet
Weight	N/A 21.0 lb9.5 kg

N/A

Inch and Metric versions
Drill holes down to 0.002” / 0.05mm Dia.
Spindle runout: 0.0002" / 0.005 mm TIR
High accuracy down stop for drilling depth control (0.001” / 0.05mm per division)
Variable speed spindle (200-20,000 RPM)
Quill travel (stroke): 1.5” / 38.1mm
Keyless Albrecht chuck versions for quick and easy drill change;
standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm
WW collet versions for less run out and improved accuracy;
0.0039"-0.252" / 0.1-6.4 mm collet sizes available
Graduated dial gauge for depth control
(0.001” / 0.05mm per division)
Wide selection of bases and accessories
Drill capacity: to 1/16" in inconel
to 1/8" in steel
to 3/16" in aluminum (collet only)
Electrical: 115 volts AC, 50/60 Hz, 2 amps
(220V/115V transformer available)

Brands