Item # 9400, Model 9400 Ellis Drill Press On Penn Tool Co.

Unit of Measure

Technical Specs | Features

Shipping Weight	N/A 675 lb
Brands	N/A Ellis
Drilling Capacity Cast Iron	N/A 1 -1/4 in
Range of Spindle Speeds Revolution Per Minute (Rpm)	N/A 0 to 1200 rpm
Distance Spindle To Table (Max.)	N/A 27-1/4 in
Base Dimensions	N/A 16-3/8 x 26-5/8 in
Motor Horse Power (Hp)	N/A 2 hp
Spindle-Base	N/A 46-1/4
Control Box	N/A - Infinitely variable speed with a turn of the dial - Instantaneous electronic reversing - Full torque at low peeds - All solid state circuitry - Continuous speed adjustment while in operation
Drills-Center	N/A 18-1/8 in
Drilling Capacity Steel	N/A 1-1/16 in
Tapping Capacity	N/A 3/4 in
Morse Taper	N/A 3
Quill Diameter	N/A 3 in
Spindle Travel	N/A 5-3/8 in
Column Diameter	N/A 4 in
Width	N/A 20 in
Height	N/A 69-1/2 in
Depth	N/A 29 in
Single Phase Alternating Current	N/A 110 V220 V
Speed Control	N/A Continuous speed adjustment while in operation Instantaneous reversing for tapping One turn on knob for adjusting speed (0 to 1200 rpm)

N/A

Shipping Weight