COMPANY HEADER
Print Back
This economical belt driven drill press runs smoothly even at full capacity - the DP-1000E is a 15-1/2" drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.
Unit of Measure

Technical Specs

Shipping Weight

 N/A 290 lb

Brands

 N/A Baileigh

Quill Diameter

 N/A 2 in

Diameter of Column

 N/A 3-1/8 in

Spindle Taper

 N/A MT2

Table Size

 N/A 12-1/2 x 12-1/2 in

Base Size

 N/A 23 x 16 in

Swing

 N/A 15-1/2 in

Spindle Travel

 N/A 3 mm

Power

 N/A 110 V

Shipping Dimensions

 N/A 60 x 44 x 21 in

Part Number

 N/A DP-1000E

Speed

 N/A 5 rpm

Revolution Per Minute (RPM)

 N/A 1150 1900 250 2900 700

Maximum Spindle Nose to Table

 N/A 35 to 1/2 in

Minimum Spindle Nose to Table

 N/A 5-1/2 in

Spindle Nose to Base

 N/A 47 to 1/2 in

Motor Phase

 N/A 1/2 hp

Drill Capacity in Steel

 N/A 1 in

T-Slot Width at 2

 N/A 1/2 in

Table Angle Adj L or R

 N/A 360 º

Certification

 N/A CE

Special Notes

Special Notes

 N/A B-16 1-16mm Keyless Chuck, MT2 to B16 Arbor, Drift Key

Features

Features

 N/A
  • .5 hp motor requires 110 volt power and will work at any shop or site.
  • Belt driven head drills a maximum capacity of 1" steel.
  • 5 speeds in the range from 250 to 2900 rpm to suit your application.
  • 3-1/8" steel column eliminates flexing even when drilling at full capacity.
  • Rigid cast iron base and table add strength to the drill’s structure.
  • Includes a safety shield around the drill head to protect you.
  • Baileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone from their experienced team.