COMPANY HEADER
Print Back
Head Tilts 90º Left & Right and Swivels 360º
Hardened 4 M.T. Spindle
This heavy duty, power feed geared head direct drive drill press is now available in an economical package, capable of handling a wide range or your drilling and hole finishing operations.
Unit of Measure

Technical Specs

Brands

 N/A Rong

Overall Height

 N/A 90.5 in

Drilling Capacity Cast Iron

 N/A 2 in

Number Of Spindle Speeds

 N/A 60 to 3000 rpm

Table Work Surface

 N/A 21-1/4 x 18-1/2 in

Swing

 N/A 20.8 in

Spindle Travel

 N/A 5.5 in

Column Diameter

 N/A 4.5 in

Weight

 N/A 615 lb685 lb

Maximum Distance Spindle Nose to Base

 N/A 30.6 in

Maximum Distance Spindle Nose to Table

 N/A 54.6 in

Motor 2 Speed

 N/A 1-1/2 hp3

T-Slot Size at 3

 N/A 5/8 in

3 Step Power Down Feed

 N/A 0.12 to 0.18 to 0.25 rpm

Center Distance Between T-slot

 N/A 6-1/2 in

Cooling Pump

 N/A 1/8 hp

Features

Features

 N/A
  • Spindle power down feed by 3 step feeds: 0.01mm - 0.18mm - 0.26mm per/r.p.m.
  • Coolant system.
  • Spindle is equipped with four heavy duty taper roller bearings.
  • Forward and reverse switch.
  • Head rotates 360º and tilts 90º left and 30º right.
  • Elevator head stock moved by rack.
  • Massive 3" diameter quill provides rigidity during operations.
  • Gear drive operating in oil bath provides maximum efficiency smooth, quiet operation & long life.