COMPANY HEADER
Print Back
Flex-Hone Diamond Honing Tool, 9mm (.354") Bore Diameter - BC9M800CD - 53-800-728
  • Free cutting with a rapid cut rate that produces an optimal finish.
  • Designed to finish harder materials.
  • Carbide wear parts.
  • Guide & drill bushings.
  • Ceramic cylinders.
  • Heat treated steel.
  • High nickel stainless steel.
  • MMX aluminum alloys.
  • Chrome & plated bores.
  • Aerospace components.
  • Medical parts.
  • EDM recast layer.
  • Contain 95% raw grain abrasive at the point of attack as opposed to abrasive nylon tools which contain 30% to 40%.
  • Resin bond diamond crystals that have high friability.
  • A crystal with high friability creates self-sharpening edges.
  • Tools are listed by the nominal diameter in which they are intended to be used & the actual sizes are made larger to supply the proper cutting pressure.
  • If the end user nominal bore is between standard sizes, then the next larger tool should be chosen.
  • Case Study: Issue: A manufacturer of carbide wear rings was having difficulty achieving their required surface finish. Solution: In this instance, the diamond flex-hone was used in progressively finer grits to create a near mirror finish lowering Ra from 0.7 to 0.05um.
Unit of Measure

Technical Specs

Brands

N/A Flex-Hone

Grit

N/A 800

Bore Diameter

N/A 9 mm0.354 in