Item # BA9-1020693, Baileigh VMD-931G Vertical Mill/Drill, 31.5 x 9.45 Inch (in) Table Size On Penn Tool Co.

Unit of Measure

Technical Specs | Features | Note

Brands	N/A Baileigh
Table Size	N/A 31.5 x 9.45 in
Spindle Taper	N/A R8
Spindle Motor Power	N/A 2 hp
Spindle Speeds	N/A 1180 rpm1970 rpm210 rpm345 rpm670 rpm90 rpm
Distance From Spindle Nose To Table	N/A 17.32 in
Spindle Travel	N/A 4.75 in
Spindle Stroke	N/A 4.75 in
Shipping Weight	N/A 1200 lb
Part Number	N/A VMD-931G
Stock Number	N/A BA9-1020693
Head Miter	N/A 17243
X Axis Travel	N/A 22 in
Y Axis Travel	N/A 7.48 in
Work Table Weight Capacity	N/A 350 lb
T Slots	N/A 0.55 in
Coolant Pump	N/A 1/8 hp
End Mill Size Maximum	N/A 1.25 in
Power	N/A 110 W
Drill Capacity	N/A 1.5 in
Shipping Length	N/A 40 in
Shipping Height	N/A 50 in
Shipping Width	N/A 44 in

N/A

2 hp motor runs on 110 volt single-phase power, optimal for any shop, garage, or educational institution.
1.75" maximum drilling capacity.
31.5" x 9.45" milling-style table enables you to tackle a wider variety of projects (with the right tooling).
Table incorporates an X-axis power feed to make those longer cuts accurately.
Gear-driven head swivels 90° left and right.
You can choose from 6 speeds to accommodate each mill, drill or tap size available: 90, 210, 345, 670, 1180, 1970 rpm.
Wide steel column eliminates flex when you’re milling or drilling at full capacity.
Heavy-duty base, made from a rigid iron casting, adds to the machine’s strength and minimizes vibrations.
Comes standard with a coolant system, R8 spindle taper, and a flexible halogen light.
This drill press mill is covered by a 1-year warranty and lifetime technical support by phone from Baileigh's team of knowledgeable reps.

N/A Recommended for: Milling, drilling, tapping, and boring.

Brands