COMPANY HEADER
Print Back
Unit of Measure

Technical Specs

Brands

 N/A Manford

Table Size

 N/A 10 x 54 in

Longitudinal Travel Hand Only

 N/A 32-5/8 in

Cross Travel Y- Axis

 N/A 15 in

Ram Travel

 N/A 22 in

Quill Travel

 N/A 4.5 in

Spindle Taper

 N/A NST#30 option R8

Head Swivel

 N/A 360 º

Head Swivel Right Hand (RH) in Degrees

 N/A 90 º

Head Swivel Left Hand (LH) in Degrees

 N/A 90 º

Head Tilting Front in Degrees

 N/A 45 º

Head Tilting Bank in Degrees

 N/A 45 º

Spindle Motor Power

 N/A 3 hp

Spindle Motor Phase

 N/A 3

Voltage

 N/A 220 V440 V

Spindle Speeds

 N/A 60 to 4500 rpm

Net Weight

 N/A 3080 lb

Length

 N/A 72-7/8 in

Width

 N/A 74 3/4 in

Height

 N/A 83 1/2 in

Quill Feed

 N/A 0.0015 0.003 0.006

T-Slot Number And Size

 N/A 3 x 5/8 in

Travel of Knee

 N/A 14 in

Maximum Distance Spindle to Column

 N/A 6 1/4 to 28 1/4 in

The Operator station will contain

 N/A
  • 3 Axis 8055-FL Mill Control (Control has4th axis capability with option)
  • 10.4 inch Color LCD screen
  • Conversational (ICON) / G-Code Programming
  • Memory: 500MBof memory card (expandable)
  • Solid Graphics
  • Customiz

Control Options

 N/A
  • UFO Flat Hand wheel on the side of the Operator Panel
  • Conversational Programming (standard)
  • Tele diagnosis
  • DNC (winding) (standard)
  • Engraving
  • Speed Feed Assistance
  • Solid Graphics (standard)
  • 2

Special Options

 N/A
  • 4th axis Drive - 4th Axis DC Driver
  • Additional I/O (54IN 31OUT) with 8 Spare M Functions - Additional PLC inputs and outputs (includes wiring & Labor)
  • ADD REMOTE START/STOP SWITCH - REMOTE PENDANT AUXILIARY START/STOP SWITCH WITH 6

Table to Spindle Nose

 N/A 5 7/8 to 9 7/8 in

Longitudinal/Cross Feed Rate

 N/A 0 to 120 in/min

Included Items

 N/A
  • 24 VDC power supply
  • Logic relays for M3, M4, and M8
  • 16 inputs and 8 outputs

Optional Accessories

Optional Accessories

 N/A
  • Coolant system
  • Coolant tray (base)
  • Hardware limit switch for 2 axes (included)
  • Air Power Drawbar (R8 or NST#30)
  • EVS head with 3 HP Inverter motor and Driver
  • Align Power feed on Z option
  • Servo Turbo Power feed on Z option
  • Transformer for power to 220V requiredfor inverter & CNC (Required if power supply is other than 220V, 3 Phase)
  • Side splash guard 2pcs
  • Coolant Mist unit stand alone
  • MPG manual Pulse Generator: hand jog remote
  • Riser block 4" / 6" / 8"

Features

Features

 N/A
  • 10" X 54" Table
  • Variable speed, 3HP, 3 Phase, 220/440V
  • R8 or NST#30 Spindle material SAE4115(SCM415) full piece by hardened & ground
  • Turcite-B On XY ways, slideways & Gibs
  • Hardened & Ground X&Y Slideways and table
  • 32mm Precision ground Ball screws on XY
  • Grinding on Ram & column slideways
  • Grinding on table T-slot
  • Hardened & ground on Quill
  • Leveling Screw & Plate On Base.
  • Strict Required Scraping with High Precise Accuracy.
  • Tool box & Tools
  • Rubber chip cover (front & rear)
  • Auto Lubrication system
  • Work light included