Item # BA9-1015771, Baileigh DP-2012F-HD-V3 Floor Drill Press On Penn Tool Co.

Need more capacity from your drill press, well look at the DP-2012F-HD-V3 floor drill press to see if it will fit your needs. This mammoth has a 20" swing and a cast iron 16.5" x 18.5" oversized table and can handle just about anything that you can throw at it. The 3.6" diameter column and 24" x 16.5" cast iron base make for one rigid structure.

The DP-2012F-HD-V3 uses 220 volt single phase power to turn its MT4 spindle to 3200 rpms. The range of speeds is done through the use of six pulleysmore

Unit of Measure

Technical Specs

Shipping Weight	N/A 390 lb
Brands	N/A Baileigh
Spindle Speed Range	N/A 12 to 220 to 3200 rpm
Drill Capacity	N/A 1.25 in
Spindle Travel	N/A 4.75 in
Width	N/A 25.6 in
Height	N/A 66.7 in
Weight	N/A 259 lb
Shipping Dimensions	N/A 69 x 44 x 24 in
Table Size Width	N/A 18.5 in
Part Number	N/A DP-2012F-HD-V3
Table Size Length	N/A 16.5 in
Motor Revolution Per Minute (RPM)	N/A 150 to 4200 rpm
Spindle	N/A MT4
Single Phase Power	N/A 220 V
Length	N/A 35.4 in
Horse Power	N/A 2 hp
Distance from Spindle to Table	N/A 26 in
Distance from Spindle to Base	N/A 46.75 in
JT3 Key Drill Chuck Capacity	N/A 1/32 to 5/8 in
T-Slot Size at 3	N/A 5/8 in

Technical Specs

Shipping Weight

Brands

Spindle Speed Range

Drill Capacity

Spindle Travel

Width

Height

Weight

Shipping Dimensions

Table Size Width

Part Number

Table Size Length

Motor Revolution Per Minute (RPM)

Spindle

Single Phase Power

Length

Horse Power

Distance from Spindle to Table

Distance from Spindle to Base

JT3 Key Drill Chuck Capacity

T-Slot Size at 3