COMPANY HEADER
Request Information
Unit of Measure
Items
Bridgeport Mill Standard Quillmate Positive Vertical Quill Control for All Bridgeport Mills (98-200-9)

Bridgeport Mill Standard Quillmate Positive Vertical Quill Control for All Bridgeport Mills
Proxxon Micro Milling Machine (37-110)

Proxxon Micro Milling Machine
Precise Mini Milling and Drilling Machine (XJ-9510-1)

Precise Mini Milling and Drilling Machine
Proxxon Micro Milling Machine (34-108-P)

Proxxon Micro Milling Machine
ACER E-mill 10 x 54 Inch (in) Gray Color 3VKH Milling Machine (E-3VKH4G)

ACER E-mill 10 x 54 Inch (in) Gray Color 3VKH Milling Machine
Description N/A N/A The unit is supplied with a stable base of cast iron. Both vertical column and compound table are of treated, high quality aluminum. All axes are play-free and have adjustable slides. The headstock, made of die-cast aluminum, houses the 24 pole balanced special motor and provides stability even at high operating speeds. This stability facilitates the use of the finest cutters.

Six triple slit, hardened MICROMOT steel collets come with the machine and cover shank sizes of 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.35, 3.0, 3.2 mm). 		N/A N/A The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360º, indicated on a scale. Height is adjustable. One revolution equals 1/32" (1mm) travel, 1 division equals 0.002" (0.05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds. N/A
Brands N/A Bridgeport Milling Machine N/A Proxxon N/A OTMT Precise N/A Proxxon N/A ACER
Model N/A N/A N/A OT2213 N/A N/A 3VKH
Table Size N/A N/A 7-7/8 x 2-3/4 in200 x 70 mm N/A N/A 10-5/8 x 3-5/32 in270 x 80 mm N/A
Table Load Capacity N/A
Table T-Slot Size N/A
Longitudinal Travel Hand Only N/A
Longitudinal Travel with Power Feed N/A
Cross Travel Y- Axis N/A
Vertical Travel N/A N/A 2-3/4 in70 mm N/A N/A N/A
Ram Travel N/A N/A N/A N/A N/A 20 in
Quill Travel N/A N/A N/A N/A N/A 5 in
Spindle Taper N/A N/A N/A R8 N/A N/A R8
Head Swivel N/A
Head Swivel Right Hand (RH) in Degrees N/A
Head Swivel Left Hand (LH) in Degrees N/A
Head Tilting Front in Degrees N/A N/A N/A N/A N/A 45 º
Head Tilting Bank in Degrees N/A N/A N/A N/A N/A 45 º
Head Tilting Up and Down in Degrees N/A
Ram Turret Swivel N/A
Spindle Motor Power N/A
Spindle Motor Phase N/A
Voltage N/A
Spindle Speeds Type N/A
Spindle Speeds N/A N/A N/A N/A N/A 60 to 4500 rpm
Low Spindle Speeds N/A
Spindle Speeds (16 Speed) N/A
Spindle Speeds (8 Speed 1 Phase Unit) N/A
Net Weight N/A
Dimension A N/A
Dimension B N/A
Dimension C N/A
Speed N/A N/A N/A N/A 1,500 to 2,200 rpm280 to 550 rpm870 to 1,200 rpm N/A
X-Y Travel N/A N/A 1-13/16 in5-17/64 in134 mm46 mm N/A N/A 6-11/16 x 2-9/16 in170 x 65 mm N/A
Footprint Size N/A N/A 5-7/64 x 8-55/64 in130 x 225 mm N/A N/A N/A
Maximum Power N/A N/A 1/8 hp100 W N/A N/A N/A
Alternating Voltage Current (Vac) At 60 Hertz (Hz) N/A N/A 110 to 120 V N/A N/A 110 to 120 V N/A
Horsepower N/A N/A N/A 1/2 hp N/A N/A
High Speed Range N/A
Low Speed Range N/A
Length N/A N/A N/A 22.04 in N/A N/A
Width N/A N/A N/A 19.68 in N/A N/A
Height N/A N/A 13-25/64 in340 mm N/A 29.13 in N/A 20 in500 mm N/A
Drilling Capacity N/A N/A N/A 0.51 in13 mm N/A N/A
End Milling Capacity N/A N/A N/A 0.61 in16 mm N/A N/A
Face Milling Capacity N/A N/A N/A 1.81 in30 mm N/A N/A
Machine Type N/A N/A N/A Milling N/A N/A
Output Power N/A N/A N/A 1/2 hp350 W N/A N/A
Power Engine N/A N/A N/A 1/2 hp N/A N/A
Price Table Description N/A N/A N/A X2 Mini Milling Machine N/A N/A
Spindle Range N/A N/A N/A -45 to 45 º N/A N/A
T Slot N/A N/A N/A 0.47 in12 mm N/A N/A
Travel of Table Forward and Backward N/A N/A N/A 3.93 in100 mm N/A N/A
Travel Headstock N/A N/A N/A 7.08 in180 mm N/A N/A
Travel of Table Right and Left N/A N/A N/A 8.66 in220 mm N/A N/A
Country of Origin N/A N/A N/A Import N/A N/A
Column Size N/A N/A N/A N/A 1-3/8 x 15-3/4 in35 x 400 mm N/A
Shipping Restrictions N/A
Distance From Spindle Nose To Table N/A
Minimum Distance From Spindle Axis Top Column N/A
Spindle Travel N/A
Stand Length N/A
Stand Width N/A
Stand Height N/A
Step Of Spindle N/A
Spindle Stroke N/A
Swing N/A
Work Table N/A
Cross travel N/A
Column Diameter N/A
Must Buy N/A
Unit Of Measure N/A
Optional Accessories N/A N/A N/A N/A N/A Operation manual with parts manual R8 drawbar Tool Box with tools Way covers
Table N/A
Working Surface N/A N/A N/A N/A N/A 10 x 50 in
T Slot Number N/A N/A N/A N/A N/A 3 in5/8 in
Table Travel (X Axis) N/A
Saddle Travel (Y Axis) N/A
Spindle Gage Line To Table Top N/A
Taper N/A
Quill Feed N/A
Accuracy N/A
Head Tilt Up-And Down (Each Way) N/A
Floor Area (Width X Depth) N/A
Drilling Cast Iron N/A
Capacity Mild Steel N/A
Face Mill Capacity N/A
End Mill Capacity N/A
Maximum Distance To Table N/A
Quill Diameter N/A
Working Table Longitudinal Travel N/A N/A N/A N/A N/A 32-1/2 in
Working Table Cross Travel N/A N/A N/A N/A N/A 17 in
Vertical Spindle Motor N/A
Table Longitudinal Travel N/A
Table Travel (Cross) N/A
Headstock Travel N/A
Maximum Face Cutter Diameter N/A
Table Travel (X-Axis) with Power Feed N/A
Saddle Travel (Y-Axis) N/A
Knee Travel (Z-Axis) N/A
Throat Distance Minimum N/A
Throat Distance Maximum N/A
Table To Spindle Nose Gage Line Minimum N/A
Table To Spindle Nose Gage Line Maximum N/A
Travel of Ram N/A
Base Length N/A
T-Slots Centers N/A
Alternating Current (Ac) Power Rating For Spindle (2J Head) (30 Min. Duty Cycle) N/A
Alternating Current (Ac) Power Rating For Spindle (2J Head) (Continuous) N/A
Optional Spindle Taper N/A
Power Quill Feed N/A
Speed Range Manual Adjust N/A
Drilling Capacity Power Quill Feed N/A
Drilling Capacity Milling Capacity (Mild Steel) N/A
Drilling Capacity Boring Range (Mild Steel) Diameter N/A
Drilling Capacity Spindle Diameter N/A
Drilling Capacity Quill Diameter N/A
Positioning Auto (X, Y) 100 Ipm N/A
Positioning Manual (X, Y) 100 Ipm N/A
Federate Range (X, Y) 0.1 to 35 Ipm N/A
Positioning Minimum Increment N/A
Space and Weight Floor Area N/A
Space and Weight Height N/A
Shipping Weight N/A
Power Capacity N/A
Quill Feed Speed Revolutions N/A
Part Number N/A
Stock Number N/A
Style N/A
Current Draw at 230 Volt (V) and 3 Phase (Ph) N/A
Collet Capacity N/A
Quill Down Feed Rates N/A
Head Miter N/A
X Axis Travel N/A
Y Axis Travel N/A
Z Axis Travel N/A
Work Table Weight Capacity N/A
T Slots N/A
Coolant Pump N/A
End Mill Size Maximum N/A
Power N/A
Drill Capacity N/A
Spindle To Column Minimum N/A
Speed Range N/A N/A 5000 to 20000 rpm N/A 0 to 2500 rpm N/A N/A
Spindle To Column Maximum N/A
Spindle To Nose Table N/A
Wiring Voltage At 60 Hertz (Hz) N/A
Quill Feed (Ipr) N/A
Item Number N/A
Quill (Spindle) Diameter N/A
Quill (Spindle) Travel N/A
Speed Type N/A
Power Input N/A
Longitudinal Travel For 10 x 50 Inch (In) Working Surface N/A
Table Cross Travel N/A
Quill Diameter (Chromed) N/A N/A N/A N/A N/A 3-3/8 in
Power Quill Feeds N/A N/A N/A N/A N/A 0.0015 in/rev0.003 in/rev0.006 in/rev
Spindle Drive N/A N/A N/A N/A N/A Variable
Head Moves Right To Left N/A N/A N/A N/A N/A 90 º
Main Motor N/A N/A N/A N/A N/A 3 hp
T-Slot Number And Size N/A
Vertical Knee Travel N/A N/A N/A N/A N/A 19 in
Vertical Knee Travel Z-Axis N/A
Weight with Stand N/A
Number Of Spindle Speeds N/A
Maximum Table Travel N/A
Three T Slots Length N/A
Three T Slots Width N/A
Three T Slots Height N/A
Adjustable Wheels with 1 Revolution N/A
Adjustable Wheels with 1 Division N/A
Table Longitudinal Travel With Powerfeed N/A
T-Slots Number And Size N/A
Travel of Knee N/A
Digital Readout N/A
Powerfeed N/A
Height Above Floor Maximum N/A
Table feed N/A
Maximum Distance Spindle to Table N/A
Maximum Distance Spindle to Column N/A
Minimum Distance to Column N/A
The Operator station will contain N/A
Control Options N/A
Special Options N/A
Table to Spindle Nose N/A
Longitudinal/Cross Feed Rate N/A
Column Width N/A
Saddle Width N/A
Power Draw Bar N/A
CNC Package N/A
Number of Axis N/A
Spindle N/A
Spindle Runout Maximum N/A
T-Slot Width N/A
T-slot Quantity N/A
Table Surface to Floor Dimension N/A
Spindle Centerline to Column Face N/A
Leadscrews with ground pitch surface (X And Y) (Ball Screws Optional) N/A
Adjustable scale ring display resolution N/A
Ways - X, Y and Z Axes - Hard Chrome Plated N/A
Spindle Bearings ABEC-7 matched set N/A
Coolant Capacity N/A
Durability N/A
Safety N/A
Ease of Use N/A
Inverter Type N/A
Floor Space N/A
Maximum Weight of Workpiece N/A
Table travel (X-Axis) Without Power Feed N/A
Milling Head Gear and Quill N/A
Machine Construction N/A
Bed Ways N/A
Table Width N/A
Table Length N/A
X-Axis Table Travel N/A
Range of Longitudinal Feed Per Revolution N/A
Range of Metric Threads N/A
Spindle Bore N/A
Range of Threads N/A
Top Slide Travel N/A
Width of Bed N/A
Taper of Spindle Bore N/A
Taper of Tailstock Quill N/A
Swing Over Cross Slide N/A
Distance Between Centers N/A
Power Voltage N/A
3-Axis Position Indicator N/A
Details N/A
Spindle Axis-to-Table Surface Distance N/A
T-Slots width N/A
T-Slots Spacing N/A
Speed Height-Adjustment Maximum N/A
Travel Y-Axis N/A
Travel Z-Axis N/A
Vertical Milling Head Spindle Mount N/A
Vertical Milling Head Throat N/A
Vertical Milling Head Quill stroke N/A
Rapid Feed X-axis N/A
Rapid Feed Y-axis N/A
Rapid Feed Z-axis N/A
Feed Speed X-axis N/A
Feed Speed Y-axis N/A
Feed Speed Z-axis N/A
Motor Rating Feed N/A
Motor Rating for Z-Axis Drive N/A
Motor Rating Coolant Pump N/A
Flow Rate and Coolant Pump N/A
Optional Machine Accessories N/A
Longitudinal travel (X-axis) with No Powerfeed N/A
Slide ways N/A
Quill feeds N/A
Head Movement (Right and Left) N/A
Head Movement (Front and Back) N/A
Overall Length N/A
Overall Height N/A
Overall Depth N/A
Overall Width N/A
Packing Length N/A
Packing Width N/A
Packing Height N/A
Current Draw at 460 Volt (V) and 3 Phase (Ph) N/A
Prewired Voltage N/A
Shipping Length N/A
Shipping Height N/A
Shipping Width N/A
Weight N/A N/A 15.5 lb7 kg N/A 140.00000 lb N/A 41.0 lb17 kg N/A 3300 lb3450 lb
Standard Equipment N/A
Features N/A
  • Solves the costly adjustment depth problems of the work spindle for boring, milling, drilling, etc.
  • Installed in seconds. No holes to be drilled.
  • Speeds operations and eliminates rejects.
  • Fast positioning reference rod 5.000" + .0005", 3/8" dia. hardened and ground, covers entire quill travel.
  • Self aligning indicator holders, universal base and precision stop ring included. Made in U.S.A.
 		N/A
  • Way covers
  • 2 speed ranges
 		N/A N/A N/A
  • 3 HP inverter motor with fan cooling system dissipates heat efficiency
  • Grease fitting for lubricating the bull gear
  • One piece quill pinion & shaft
  • Precision hand scraped contact surfaces between turret and column
  • X, Y and knee axes are hardened and ground to HRC 52 degrees
  • Vector-type AC frequency inverter drive
  • Hardened & ground table top to HRC 52 degrees
  • Licensed Taiwanese Meehanite casting
  • Dish-in coolant base
  • Auto lubrication system
  • CE Electric components
  • Extra oiler lubricates the high-low moving device
  • Extra oiler to lubricate the quill
  • Precision ground ram ways within 0.004" accuracy
  • Ground screws and Split nut assembly allowing for 0.005" Backlash
  • Precision ground table guide line to 0.0002" over 20"
  • Standard accordion type way cover
  • Turcite-B coated saddle ways
  • 230V / 460V three phase ready and available to run at single phase 230V when specified
Included Items N/A N/A Drill chuck. Instruction manual Keys N/A N/A N/A
Standard Accessories N/A
Machine Features N/A
Additional Information N/A N/A The table is fitted with three T-slots of the 15/32" x 15/64" x 13/64" (12 x 6 x 5mm) MICROMOT-norm. An adjustable ruler scale eases the positioning of the work piece. All hand wheels are zero adjustable with 1 revolution = 1/32" (1.0mm), 1 division = .002" (0.05mm). N/A N/A The machine comes with three collets of 15/64", 5/16" and 25/64" (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64" (the MICROMOT norm of 12 x 6 x 5mm). N/A
Note N/A Made in USA N/A N/A N/A For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230's lock levers. N/A White color also available.
Base Width N/A